Maintaining The P095 Pilot's Adjustable Restrictor - Honeywell HON R100NG Series User And Maintenance Manual

Next task
8.5.3 Maintaining the P095 pilot's adjustable restrictor
Cleaning
Maintaining the adjusta‐
ble restrictor
User manual for HON R100 gas pressure regulator with HON P095NG pilot
Figure
Proceed as follows:
 Maintaining the adjustable restrictor (see page 75)
 Completing the maintenance (see page 76)
 Maintaining the actuator assembly (see page 50)
 Storing the device (see page 78)
Observe the following cleaning instructions:
 Before assembly, all parts must be cleaned in order to remove any foreign particles
(swarf) and soiling.
 If screws, bolts, or washers are replaced with identical new parts, any oil on these new
parts must first be removed.
Proceed as follows:
Figure
Step Description
45 Screw the cap (1) back on.
Step Description
1 Unscrew the adjustable restrictor (1) from
the pilot.
2 Unscrew the sleeve nut (1) and remove it.
Maintenance
75