Honeywell HON R100NG Series User And Maintenance Manual page 41

User manual for HON R100 gas pressure regulator with HON P095NG pilot
Figure
Adjusting the settings of the device
Step Description
3b To lower the operating pressure, unscrew
the set screw. Adjust the screw position
until the operating pressure you want is
reached.
4 Now secure the set screw's position by
tightening the hex nut (1). Important!
Make sure that the set screw does not turn
as you tighten the hex nut!
5 Screw the cap (1) back on.
41