Interpreting the type
plate of the pilot
2.5
Layout and operation
Assemblies
How it works
User manual for HON R100 gas pressure regulator with HON P095NG pilot
The details on the type plate have the following meaning:
Figure
The gas pressure regulator is made up of the following assemblies:
Figure
Gas pressure regulators consisting of an HON R100NG actuator assembly combined
with an HON P095NG pilot can be used to maintain the outlet pressure of a gas con‐
stant within set limits within a regulating line regardless of the influence of disturbance
variables such as inlet pressure changes and/or discharge changes.
The outlet pressure that needs to be regulated is fed to the pilot. The diaphragm system
in the pilot determines the pressure process value as a force on the measuring dia‐
phragm and compares it with the force of the pilot spring, which is used as reference
variable. If control deviations are detected based on the results from this comparison,
the opening position of the actuator assembly's regulating diaphragm will be changed
by adjusting the motorization pressure so that the pressure being regulated (process
value) will change to match the setpoint. When there is zero pressure flow, the device
seals tightly.
No.
Meaning
1
Manufacturer
2
Name of the device
3
Manufacturing date
4
Setpoint range
5
Specific set range
6
Response pressure setpoint
7
In conformity with standard, e. g.,
DIN EN 334
8
CE marking
9
Serial number
10
Customer revision No.
11
Maximum inlet pressure
12
Temperature range
No.
Description
1
HON R100NG actuator assembly
2
HON P095NG pilot
Description
12