General; Trademark Information; Product Description - Honeywell Unitary Installation Instructions Manual

GENERAL

Trademark Information

• BACnet™ is a registered trademark of ASHRAE Inc.
• Sylk™ is a trademark of Honeywell International Inc.

Product Description

Honeywell 230 VAC Unitary BACnet™ RJ45 (IP),
BACnet™ MS/TP and BACnet™ T1L (IP), controllers
provide flexible, freely programmable, demand-led
control that delivers tangible benefits to reduce energy
spending while driving new levels of functionality and
efficiency in today's buildings. Operating control for
HVAC systems to control blower fan, thermostats.
Independently mounted control.
They offer performance-based engineering with
Niagara 4 and enable Single-Tool-Engineering
throughout the whole Building Management System
with cost-effective installation.
Part Number
UN-RS0844ES230NMC / D
UN-RS0844ESB230NMC / D
UN-RS0844MS230NMC / D
UN-RS0844MSB230NMC / D
UN-RS0844TS230NMC / D
UN-RS0844TSB230NMC / D
UN-RL1644ES230NMC / D
UN-RL1644ESB230NMC / D
UN-RL1644MS230NMC / D
UN-RL1644MSB230NMC / D
UN-RL1644TS230NMC / D
UN-RL1644TSB230NMC / D
Note: SKUs with C are applicable to all brands except HBS.
SKUs with D are applicable to HBS brand only.
Part Number
CW-Cov-L-Unitary
CW-Cov-S-Unitary
10BASE-T1L-ADAPT
HONEYWELL UNITARY CONTROLLER - 230 VAC - INSTALLATION INSTRUCTIONS
Table 1 Part Numbers
Housing UIO
Small
Small
Small
Small
Small
Small
Large 16
Large 16
Large 16
Large 16
Large 16
Large 16
Table 2 Accessories/Replacement Parts
Terminal cover for the L-version of the unitary controller (sold in pack of 10)
Terminal cover for the S-version of the unitary controller (sold in pack of 10)
IP-T1L single pair media adapter that allows converting 10BASE-T traffic to 10BASE-T1L
The integrated Bluetooth® Low Energy (BLE) capability
enables an easy pairing with mobile apps.
These new generation controllers offer BACnet™ RJ45
(IP), BACnet™ T1L (IP), or BACnet™ MS/TP as a
backbone interface and Sylk™ and Modbus RTU as sub
interface, flexible universal input/output (UIO) points,
power relays and DO Chopper output (DO CHP).
These BACnet™ IP or BACnet™ MS/TP based Unitary
controllers utilize smart engineering, commissioning
tools, and Sylk™ technology. These controllers can
achieve multiple flexible configurations to address
specific applications with the Niagara Engineering tool.
The controllers can stand-alone operation; however,
they can achieve optimum functional benefits when
they use network communication capabilities.
BACnet™ MS/TP models of controller communicate via
a TIA/EIA 485 BACnet™ MS/TP communication
network, capable of baud rates between 9.6 and
76.8 kbps. BACnet™ RJ45 (IP) models communicate
over a wired standard network cable and BACnet™ T1L
(IP) communicate via a 2-wire twisted pair cable.
DO
Relay
CHP
8 4 4
8 4 4
8 4 4
8 4 4
8 4 4
8 4 4
4 4
4 4
4 4
4 4
4 4
4 4
Description
3
Communication Sylk
BACnet™ IP
BACnet™ IP
BACnet™ MS/TP
BACnet™ MS/TP
BACnet™ T1L
BACnet™ T1L
BACnet™ IP
BACnet™ IP
BACnet™ MS/TP
BACnet™ MS/TP
BACnet™ T1L
BACnet™ T1L
Bluetooth
Yes No
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
31-00610-01