[Pr. Pb16_Notch Shape Selection 2 (Nhq2)] - Mitsubishi Electric Melservo-Jet MR-JET-G User Manual

[Pr. PB16_Notch shape selection 2 (NHQ2)]

Initial value
00000000h
Set forms of the machine resonance suppression filter 2.
When [Pr. PA08.0 Gain adjustment mode selection] is set to "5" (quick tuning mode), the setting value of this servo parameter
reflects the adjustment result of quick tuning.
[Pr. PB16.0_Machine resonance suppression filter 2 selection]
Initial value
0h
0: Disabled
1: Enabled
[Pr. PB16.1_Notch depth selection]
Initial value
0h
0: -40 dB
1: -14 dB
2: -8 dB
3: -4 dB
[Pr. PB16.2_Notch width selection]
Initial value
0h
0: α = 2
1: α = 3
2: α = 4
3: α = 5
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting range
Refer to the text
1.3 Gain/filter setting servo parameters group ([Pr. PB_ _ ])
Ver.
Refer to the relevant detail No.
Ver.
A4
Ver.
A4
Ver.
A4
1 SERVO PARAMETER DETAILS
1
31