[Pr. Pf80_Drive Recorder - Operation Condition Selection (Drmc)] - Mitsubishi Electric Melservo-Jet MR-JET-G User Manual

[Pr. PF80_Drive recorder - Operation condition selection (DRMC)]

Initial value
00000000h
[Pr. PF80.0_Drive recorder - Operation mode selection]
Initial value
0h
0: Automatic setting mode
1: Manual setting mode
When "0" (automatic setting mode) is set, the setting values of [Pr. PF81 Drive recorder - Sampling operation selection] to [Pr.
PF94 Drive recorder - Digital channel setting 4] are disabled. The drive recorder will be activated automatically at the same
time as an alarm occurs.
When obtaining desired analog data from the drive recorder, set this servo parameter to "1" (manual setting mode) to set the
trigger conditions and sampling cycle, and then start sampling with [Pr. PF81.0 Drive recorder - Sampling start selection].
To disable the drive recorder, set [Pr. PF21 Drive recorder switching time setting] to "-1" (drive recorder function disabled).
[Pr. PF80.2-3_Drive recorder - Sampling cycle selection]
Initial value
00h
Set the sampling cycle of the drive recorder.
When [Pr. PF80.0] is set to "0" (automatic setting mode), the setting value of this servo parameter is disabled.
Setting value
00
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
1 SERVO PARAMETER DETAILS
84
1.7 Extension setting 3 servo parameters group ([Pr. PF_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
8 kHz class
Automatic (250 μs)
250 μs
500 μs
1 ms
2 ms
4 ms
8 ms
16 ms
32 ms
64 ms
128 ms
256 ms
512 ms
1.024 s
Ver.
Refer to the relevant detail No.
Ver.
A4
Ver.
A4