[Pr. Pa17_Servo Motor Series Setting (**Msr)]; [Pr. Pa18_Servo Motor Type Setting (**Mty)] - Mitsubishi Electric Melservo-Jet MR-JET-G User Manual

[Pr. PA17_Servo motor series setting (**MSR)]

Initial value
00000000h
To select the linear servo motor to be used, set this servo parameter and [Pr. PA18.0-3 Servo motor type setting]. Set this at
the same time with [Pr. PA18.0-3]. Refer to the following table for setting values.
Linear servo motor series
LM-H3
LM-AJ

[Pr. PA18_Servo motor type setting (**MTY)]

Initial value
00000000h
[Pr. PA18.0-3_Servo motor type setting]
Initial value
0000h
When using a linear servo motor, select the linear servo motor to be used with [Pr. PA17 Servo motor series setting] and this
servo parameter. Set this at the same time with [Pr. PA17]. Refer to the following for setting values.
Page 20 [Pr. PA17_Servo motor series setting (**MSR)]
1 SERVO PARAMETER DETAILS
20
1.2 Basic setting servo parameters group ([Pr. PA_ _ ])
Setting range
Refer to the text
Linear servo motor (primary side)
LM-H3P2A-07P-BSS0
LM-H3P3A-12P-CSS0
LM-H3P3B-24P-CSS0
LM-H3P3C-36P-CSS0
LM-H3P3D-48P-CSS0
LM-H3P7A-24P-ASS0
LM-H3P7B-48P-ASS0
LM-H3P7C-72P-ASS0
LM-H3P7D-96P-ASS0
LM-AJP1B-07K-JSS0
LM-AJP1D-14K-JSS0
LM-AJP2B-12S-JSS0
LM-AJP2D-23T-JSS0
LM-AJP3B-17N-JSS0
LM-AJP3D-35R-JSS0
LM-AJP4B-22M-JSS0
LM-AJP4D-45N-JSS0
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Ver.
B2
Servo parameter
Setting value of [Pr. PA17] Setting value of [Pr.
000000BBh
000000DAh
Ver.
Refer to the relevant detail No.
Ver.
B2
PA18.0-3]
2101h
3101h
3201h
3301h
3401h
7101h
7201h
7301h
7401h
1201h
1401h
2201h
2401h
3201h
3401h
4201h
4401h