Led Safety Notice; Rack-Mount Safety Instructions; Emc (Electromagnetic Compliance) And Safety - Avid Technology FastServe Playout Setup Manual

c
Pour ne pas compromettre la protection contre les risques d'incendie, remplacer par un fusible
de meme type et de meme caractéristiques nominales.

LED Safety Notice

Avid hardware might contain LED or Laser devices for communication use. These devices are
compliant with the requirements for Class 1 LED and Laser Products and are safe in the intended use.
In normal operation the output of these laser devices does not exceed the exposure limit of the eye
and cannot cause harm.
Standard to which conformity is declared: (Class 1 LED Product per IEC 60825-1:2007)

Rack-Mount Safety Instructions

1. Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment might be greater than room ambient. Therefore,
consider installing the equipment in an environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
2. Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air
flow required for safe operation of the equipment is not compromised.
3. Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
4. Circuit Overloading - Consideration should be given to the connection of the equipment to the
supply circuit and the effect that overloading of the circuits might have on overcurrent protection
and supply wiring. Appropriate consideration of equipment nameplate ratings should be used
when addressing this concern.
5. Reliable Earthing - Reliable Earthing of rack-mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct connections to the
branch circuit (for example, use of power strips).

EMC (Electromagnetic Compliance) and Safety

Avid declares that this product complies with the following standards regulating emissions,
immunity and product safety:
• FCC Part 15 Class A
• ICES-003 Class A
• EN55032 Class A
• EN61000-3-2
• EN61000-3-3
• EN55024
• EN55103-2 E4
• AS/NZS CISPR 32 Class A
67