Avid Technology FastServe Playout Setup Manual page 32

If you want to display contents of a different DVG board, change the board number index
(usually from 0 to 3) in the Linux command:
./dvgflash -board [insert board number index here] -reconf -list
4. To delete the firmware which is currently burned into a DVG board (in our example board 0),
type the following:
./dvgflash -board 0 -delete 1
The last number is an index of the firmware burned to the board (see green rectangle in the
image above).
c
Never delete the 0 element in the board as this will lead to board damage!
5. To burn new firmware to the board:
./dvgflash -board 0 -write /data/public/name_of_FW.bin
6. After burning the firmware, power cycle is recommended.
32