Installing Fastserve | Playout On A Different Server From The Same Pc - Avid Technology FastServe Playout Setup Manual

In general, WebSettings, VideoEngine, and Commander are obligatory components. In case
WatchFolder workflows are used, WatchFolder has to be installed as well.
n
If you are upgrading your system, the "Reinstall database" option is not necessary. For more
information, see the latest ReadMe on the Avid Knowledge Database.

Installing FastServe | Playout on a Different Server from the Same PC

The FastServe | Playout installer is a Windows-based setup executable. This means that, despite the
fact that the server runs on Linux, the installer executable has to be launched on a Windows machine.
The installation components are stored in the following locations:
• Components for the CentOS 7 server: C:\Program Files\Avid\FastServePlayout
• VEServer for Windows workflows: C:\Orad\VEServerWin
Each launch of such installer stores some data on your hard drive. If an installer has been launched
once and installed on a Linux server, this information is stored for the future use.
If you want to install the same version of FastServe | Playout on another server, you need to remove
it from your local computer first.
35