Display
4.7.3 Vacuum extraction
4.7.3.1 Final vacuum
550
4.7.3.2 Increase time
4.7.3.3 Decrease time
30
Operation
Four parameters can be set in the
vacuum extraction menu.
1. Press the + (6) or – (5) button to
go to the desired parameter.
2. Select the desired parameter by
pressing the MAX button (7).
»
The setting can now be made in
the next window.
To return directly to the main
menu, press the OFF button (2).
1. Press the + (6) or − (5) button to
set the desired value.
2. Confirm the value by pressing the
MAX button (7).
»
The final vacuum is set. You are
automatically redirected to the
vacuum extraction menu.
To return directly to the vacuum
extraction menu, press the OFF
button (2).
1. Press the + (6) or − (5) button to
set the desired value.
2. Confirm the value by pressing the
MAX button (7).
»
The increase time is set. You are
automatically redirected to the
vacuum extraction menu.
To return directly to the vacuum
extraction menu, press the OFF
button (2).
1. Press the + (6) or − (5) button to
set the desired value.
2. Confirm the value by pressing the
MAX button (7).
»
The decrease time is set. You are
automatically redirected to the
vacuum extraction menu.
To return directly to the vacuum
extraction menu, press the OFF
button (2).
Options
• Final vacuum
• Increase time
• Decrease
time
• Mode
• min. −70 kPa
• max. −90 kPa
• min. −700
mbar
• max. −900
mbar
• min. −525
mmHg
• max. −675
mmHg
• min. 15 sec
• max. 300 sec
• min. 15 sec
• max. 60 sec
Operation
23