Table of Contents
Advertisement
Additional information
The product is exclusively designed for use in bus systems in accordance with the AS-Interface spe-
cification (SPEC 3.0, Profile 7.5.5).
The product is intended for installation in a machine or automated system and must be used exclus-
ively as follows:
–
In an industrial environment
–
Within the limits of the product defined by the technical data è 14 Technical data.
–
In its original condition, without unauthorised modifications
–
In perfect technical condition
–
In standard operation, which includes standstill, set-up and service operation, as well as emer-
gency operation
2.3
Foreseeable misuse
The following examples of foreseeable misuse are among those not approved as intended use:
–
Outdoor use
–
Use as press safety valve
–
Bypass of the safety function
–
Use in reversible operation (using supply air instead of exhaust air, and vice versa)
–
Vacuum operation
2.4
Training of qualified personnel
Installation, commissioning, service and disassembly should only be conducted by skilled personnel.
The skilled personnel must be familiar with the installation of electrical and pneumatic control sys-
tems.
3
Additional information
–
Accessories è www.festo.com/catalogue.
–
Spare parts èwww.festo.com/spareparts.
4
Service
Contact your regional Festo contact person if you have technical questions è www.festo.com.
5
Product overview
5.1
Design
5.1.1
Product design
The product corresponds to category 3 + 4 with a maximum achievable performance level e in accord-
ance with EN ISO 13849-1.
Festo — MS6(N)-SV-...-E-ASIS — 2019-05a
5
Advertisement
Table of Contents
