Filling Flow - Festo MS6N-SV E-ASIS Series Assembly Installation Safety Instructions

Technical data
1 Tolerance range switching point
Fig. 8 Switch-through pressure
Example:
If there is an operating pressure of p 1 = 4 bar with reference to the approved tolerance of ±20 %a
switch-through pressure of 1.2 ... 2.8 bar is permissible.
14.6

Filling flow

Flow rate qn dependent on the number of rotations n of the flow control screws
p1: 4 bar
p1: 6 bar
Fig. 9 Flow diagram
Festo — MS6(N)-SV-...-E-ASIS — 2019-05a
2 Filling time is adjustable via a flow control
valve
p1: 8 bar
p1: 10 bar
23