Get The Direction Of The Leds For "Response Time" And "Exposure Time" Modes; Set The Direction Of The Leds For "Rolling Shutter" Mode; Get The Direction Of The Leds For "Rolling Shutter" Mode - Image Engineering LED-Panel V4 User Manual

Command Line Interface (CLI)
6.2.22 Get the Direction of the LEDs for "Response Time" and "Exposure
Time" Modes
Function
getDirectionSingle
Description
The function "LED-Panel.exe -getDirectionSingle" returns the current moving direction of the
LEDs in the "Response Time" and "Exposure Time" modes.
Return values
After the execution of this function the device will return a one-digit value of the current LED
direction. For the list of the possible return values please refer to the Table 1.

6.2.23 Set the Direction of the LEDs for "Rolling Shutter" Mode

Function
setDirectionMulti <value>
Description
"LED-Panel.exe -setDirectionMulti <value>" switches the desired moving direction of the LED
columns (each one consisting of ten LEDs).
There are four possible directions.
Parameters
<value> Description
1 The column moves from left to right
2 The column moves from right to left
3 The column moves from top to bottom
4 The column moves from bottom to top

6.2.24 Get the Direction of the LEDs for "Rolling Shutter" Mode

Function
getDirectionMulti
Description
The function "LED-Panel.exe -getDirectionMulti" returns the current moving direction of the
LED columns (each one consisting of ten LEDs) in "Rolling Shutter" mode.
Table 9
38