Reset Measurement; Get Camera Trigger Input State - Image Engineering LED-Panel V4 User Manual

Command Line Interface (CLI)
Function "LED-Panel.exe -isRunning" checks if the measurement is currently running.
Return parameters
Return value Description
0 the device is stopped
1 a measurement is running
Example
LED-Panel.exe –isRunning
After the execution of the command the device will return the value 0 or 1 representing the
current measurement state.

6.2.10 Reset Measurement

Function
reset
Description
"LED-Panel.exe -reset" clears all the lighting LEDs and prepares the device for a new
measurement.

6.2.11 Get Camera Trigger Input State

Function
getCameraTrigger
Description
"LED-Panel.exe -getCameraTrigger" returns the current state of the digital input "Camera
Trigger".
Table 1
32