Command Line Interface (Cli); Introduction - Image Engineering LED-Panel V4 User Manual

6 COMMAND LINE INTERFACE (CLI)

6.1 Introduction

This documentation provides help on the implemented command-line functions of the LED-
Panel and is intended to assist in scripting of the control software on Microsoft Windows.
These instructions generally apply to LED-Panels V3 and V4, which must be connected to a PC
via USB. The commands are command-line based. The command-line consists of an
executable file along with the the function and, if applicable, a parameter, all separated by white
spaces.
The executable file is always LED-Panel.exe and can be used without file extension .exe.
NOTE:
Options are case sensitive.
Every option has to start with dash ("-") or double dash ("--").
Example: LED-Panel -start or LED-Panel --start
Usage of option with more than one argument:
LED-Panel -setTrigger <arg1> -setTrigger <arg2>
For more information:
LED-Panel -h or LED-Panel -help
Examples:
LED-Panel.exe -setTrigger Cont
LED-Panel -setTrigger Cont
When using more than one LED-Panel connected to your PC the desired LED-Panel must be
set as active.
Examples (addressing an LED-Panel with the serial number LP40001):
LED-Panel.exe –serial LP40001
LED-Panel –serial LP40001
Command Line Interface (CLI)
27