Trigger Iq-Defocus (Led-Panel V4 Only); Set Auto Release (Led-Panel V4 Only) - Image Engineering LED-Panel V4 User Manual

Command Line Interface (CLI)
The <duration> can be set in 100ms steps from 0.1s to 25s. The value range is [1..250].
1 = 0.1s, 2 = 0.2s ,10 = 1s
Example:
Trigger the iQ-Trigger in standard mode for 1.5s.
LED-Panel -setTrigger 1 -setTrigger 15

6.2.28 Trigger iQ-Defocus (LED-Panel V4 only)

Function
setDefocus
Description
If a iQ-Defocus is connected to the LED-Panel it can be triggered by using „LED-Panel -
setDefocus <mode> -setDefocus <duration>".
For parameters see Fehler! Verweisquelle konnte nicht gefunden werden. Fehler! Ve
rweisquelle konnte nicht gefunden werden..

6.2.29 Set auto release (LED-Panel V4 only)

Function
setAutoRelease
Description
Modern camera systems especially mobile phones often take continously photos in the
background to avoid shooting time lag and provide some convenience features. If the user hits
the camera release button it can occure that a buffered photo is shown as the actual photo. But
this photo was take before the user hit the release button. For this case the auto release
function is implemented. If „LED-Panel -setAutoRelease 1" the LED-Panel releases the iQ-
Trigger at the 50th LED.
<mode>
0
1
Description
Off
On
41