Set Trigger Mode - Image Engineering LED-Panel V4 User Manual

Command Line Interface (CLI)
Return parameters
Return value Description
1 Response time measurement
2 Exposure time measurement
3 Frame rate measurement
4 Rolling shutter mode
5 All LEDs on
Example
LED-Panel.exe -getMode
After the execution of this command the device will return the numerical value of the activated
operation mode.

6.2.3 Set Trigger Mode

Function
setTriggerMode <trigger>
Description
"LED-Panel.exe -setTriggerMode <trigger>" sets the trigger mode
Parameters
<trigger> Description
1 internal (continuous) trigger
2 external (single) trigger
Example
LED-Panel.exe -setTriggerMode 1
After the execution of this command LED-Panel will change into the internal (continuous) trigger
mode.
29