Get Stop Trigger Input State; Get The Number Of Currently Activated Led - Image Engineering LED-Panel V4 User Manual

Command Line Interface (CLI)
Return parameters
Return value Description
digital input „Camera Trigger" is not activated
0
digital input „Camera Trigger" is activated
1

6.2.12 Get Stop Trigger Input State

Function
getStopTrigger
Description
"LED-Panel.exe -getStopTrigger" returns the state of the digital input "Stop Trigger".
Return parameters
Return value Description
digital input „Stop Trigger" is not activated
0
digital input „Stop Trigger" is activated
1

6.2.13 Get the Number of Currently Activated LED

Function
getCurrentLED
Description
With the function "LED-Panel.exe -getCurrentLED" it is possible to read which LED is currently
turned on, respectively the number of switching periods occurred after activating the „Camera
Trigger" input.
Return parameters
After the execution of the command "LED-Panel.exe -getCurrentLED" the device will return a
two- or three-digits value of the currently switched LED like XYY or YY. Where X is a one-digit
value of the lighted LED of the lower LED row and YY is two-digit value of the lighted LED in the
10x10 LED array.
Table 2
Table 3
33