Table of Contents
Advertisement
CHAPTER
2
Congratulations on your purchase of the SmarTrax™ MD system!
SmarTrax MD-assisted steering takes the stress out of driving and makes it quick and easy for you to improve
your operating efficiency and performance. SmarTrax MD is compatible with Cruizer II™ and Cruizer II™ RTK,
Envizio Pro™, Envizio Pro®, Envizio Pro XL™, and Viper Pro™ systems.
The following instructions are designed to assist with the proper installation of the SmarTrax MD system. Refer
to the SmarTrax MD Calibration & Operation Manual (P/N 016-5030-020) for assistance with calibrating the
software and using the SmarTrax MD system.
This manual applies to the following machines:
MAKE: Case IH
MODEL: AFX Series - 7010, 7120, 8010, 8120, and 9120
X230 Series - 7230, 8230, and 9230
Windrower WD XX03 Series - 1203, 1903, and 2303
Windrower WD XX04 Series - 1504, 2104, and 2504
Windrower WDX Series - 1903 and 2303
MAKE: New Holland
MODEL: CR Series - 9240, 940, 960, 970, 9040, 9060, 9070, and 9080
CX Series - 820, 840, 860, 880, 8070, 8080, and 8090
Windrower H Series - 8040, 8040PS, 8060, and 8080
Windrower HW Series - 305, 325, 345, and 365
Case IH 9230 and New Holland XXXX
FIGURE 1.
P/N 016-5030-051 Rev. B
I ntroduction
C h a p t e r 2
3
Advertisement
Table of Contents
