Reinstall The Steering Wheel - Raven SmarTrax MD Series Installation Manual

Chapter 3
Install the telescope adapter assembly (P/N 063-4001-023) on the machine's telescope rod, aligning the set
4.
screws with the flat part of the stem.
Tighten the set screws in the telescope adapter assembly.
5.
Male Spline Adapter Installed
FIGURE 16.
Align the bolt holes in the male spline assembly with the holes in the ring gear assembly.
6.
Install and tighten the spline assembly bolts to secure the male spline adapter to the ring gear and female
7.
spline adapter.

Reinstall the Steering Wheel

Steering Wheel Placement
FIGURE 17.
Steering Wheel Spokes
Aligned with Ring Gear
Assembly Spokes
Align the spokes of the steering wheel with the spokes on the installed ring gear.
1.
Install the steering wheel on the male spline adapter.
2.
Install the washer and nut on the protruding male spline adapter.
3.
16
Case IH AFX/X230 Combines, Windrower WD/WDX & New Holland CR/CX Combines, Windrower H/HW Series SmarTrax™ MD Installation Man-
Nut and Washer from
Spline Assembly
Installed