Table of Contents
Advertisement
Anti-Rotation Collar Bracket Installed
FIGURE 9.
Reposition the plastic cover on the steering column, pressing it into place to mark the anti-rotation collar
3.
bracket position.
Drill two 7/32" holes in the plastic cover in the area marked by the anti-rotation collar bracket.
4.
Note:
The holes in the cover should align with the holes in the anti-rotation collar bracket.
Reassemble the plastic covers over the anti-rotation collar bracket.
5.
Anti-Rotation Bracket Installed
FIGURE 10.
Align the holes in the anti-rotation bracket (P/N 107-4001-049) over the holes in the plastic cover.
6.
Secure the anti-rotation bracket to the anti-rotation collar bracket and plastic cover using two #10-24 x 3/4"
7.
socket head cap screws (P/N 311-0068-051).
P/N 016-5030-051 Rev. B
Mechanical Drive Installation
13
Advertisement
Table of Contents
