Table of Contents
Advertisement
Machine's Steering Wheel Nut Installed
FIGURE 13.
Install the machine's steering wheel nut that was removed during the steering wheel removal.
2.
Ring Gear Assembly Installed
FIGURE 14.
Place the ring gear assembly (P/N 063-4001-011) over the female spline adapter with the V-ring facing
3.
down and the holes in the ring gear aligned with the holes in the female spline adapter.
Telescope Adapter Assembly Installed
FIGURE 15.
P/N 016-5030-051 Rev. B
Mechanical Drive Installation
15
Advertisement
Table of Contents
