Troubleshooting
Replacing External Preselector
30
Replacement Procedure
1.
Turn off station power by turning off breaker at ac source.
2.
Disconnect cable to Receive antenna connection and cable to Receiv-
er Module.
3.
Remove screws (2) securing External Preselector to back of station.
4.
Ensure that the correct External Preselector is being installed.
5.
Install replacement External Preselector by reconnecting the 2 cables
and securing the External Preselector to the station with the 2 screws.
6.
Restore power to the station.
Post-Replacement Optimization Procedure
1.
Perform the Preselector Field Tuning Procedure of this section.
68P81096E17-E
09/30/05