Led Indicators - Motorola MTR2000 T5544 Instruction / Field Service Manual

Station Operation

LED Indicators

2
A set of 4 LEDs is located on the station front panel. The position of the 4 LEDs
on the front panel is shown in Figure 1. These LEDs indicate the status of the sta-
tion during normal operation.
Red/Green
Station Status LED
For further information on the states indicated by these LEDs, refer to the IN-
STALLATION section, Post Installation Checklist, Verifying Proper Operation.
Function
Station Status
Rx Active
FailSoft
FS
PA Keyed
FS
Green
Rx Active LED FailSoft LED
Figure 1. Front Panel LEDs
Color
red / green ... operational status of station.
green ... that the station Rx activation criteria
are satisfied. This could be:
- RF carrier only,
- PL/DPL only, or
- RF carrier plus PL/DPL.
yellow ... (if set up for trunking) that the station
is not being controlled from the trunking
central controller.
green ... that station PA is keyed.
Yellow Green
PA Keyed LED
Indicates ...
68P81096E38-D
09/30/05