Routine Maintenance 68P81096E39 - Motorola MTR2000 T5544 Instruction / Field Service Manual

1
INTRODUCTION
This section provides routine maintenance recommendations and procedures for the station and associated ancillary equip-
ment.
Routine Maintenance Overview
Note
Motorola Inc., 2005
All Rights Reserved
Printed in U.S.A.
ROUTINE MAINTENANCE
It is recommended that the station be cleaned with a soft dry cloth when the station
is being serviced.
The station and ancillary equipment have been designed with state-of-the-art tech-
nology and operate under software control, thus requiring minimal routine main-
tenance. Virtually all station operating parameters are monitored and self-
corrected by the Station Control Module, making virtually all periodic adjust-
ments and tuning unnecessary.
Providing that the equipment is installed in an area which meets the specified en-
vironmental requirements (see Installation section, Pre-Installation Consider-
ations for environmental specifications), the only routine maintenance task
required is the calibration of the station reference oscillator circuit. Details are
provided under the heading Calibrating Station Reference Oscillator.
Government & Enterprise Mobility Solutions
1301 E. Algonquin Road, Schaumburg, IL 60196
For MTR2000 Station
and Ancillary Equipment
68P81096E39-B
09/30/05-UP