Motorola MTR2000 T5544 Instruction / Field Service Manual page 328

68P81095E71-A
09/30/05
3. The component side of the Zetron interface circuit board should be
facing up when connected to the MTR2000.
If the components are facing down, this is an older version of the
MTR2000 that does not support connection to the Zetron panel.
4. Re-install the connector strain relief / fuse access plate.
5. Configure the MTR2000 Radio Service Software (RSS) for operation
with the Zetron panel. See the RSS Online Help for details.
6. Connect the interface cable to the Zetron panel.
7. Configure the Zetron panel as indicated in the Zetron Instruction
manual.
8. Follow the initial power up and adjustment instructions in the
Zetron panel Instruction manual.
Zetron Repeater Panel
3