Installation
4
ELECTRICAL CONNECTIONS
After the station equipment has been mechanically installed, electrical connections must be made. This involves making the
following connections to:
•
power supply,
•
antenna coax cables,
•
system cables, and
•
telephone lines.
STOP
IMPORTANT
There are also electrical connections associated with maintenance and troubleshooting of the station. These connectors are
located on the front of the Station Control Module (see Station Operation section for position of these connectors).
26
When installing option boards,
ensure that an Electro-Static
Discharge (ESD) cable is
connected (via banana plug) to
the hole in the front-right handle
of the station when installing
option boards. Otherwise, the
option boards may be damaged.
ESD Connect
68P81096E37-N
06/28/05