Motorola MTR2000 T5544 Instruction / Field Service Manual page 27

If the station is a Base Station or a Repeater, the power/frequency option is now selected. The power/frequency
2
option is determined based on the power specified by the customer. The following table shows the available pow-
er/frequency options:
Frequency Range – VHF
132 to 154 MHz
132 to 174 MHz
150 to 174 MHz
For Base Stations and Repeaters, the power/frequency option determines which:
• Power Supply module (based on power level) is included in the station; either Option X30AM for the 250W
power supply, or X30AL for the 500W power supply.
• Power Amplifier module (based on frequency band and power level) is included in the station.
• Exciter module (based on frequency band) is included in the station.
• Receiver module (based on frequency band) is included in the station; Option X333AE.
OR
If the station is a Receiver, the frequency option is now selected. The frequency option is determined based on
the frequency specified by the customer. The following table shows the available frequency options:
132 to 174 MHz
The frequency option determines which:
• Receiver module (based on frequency band) is included in the station; Option X333AE.
3 A System Software Option must be selected for Base Stations, Repeaters and Receivers as follows:
Conventional Analog Operation
Conventional Analog RECEIVER
6809 Trunking Analog Operation
6809 Trunking Analog Receiver
If the station is a Receiver, go to step 5.
For Trunking Analog Operation the software option determines that the Auxiliary I.O Board is included in the
station; Option X151AH.
xxiv
Option X345AA
Frequency Range – VHF
System Type
Output Power
30 W 40 W
–
Option X330AD
–
Receiver Option
Option X319AC
68P81096E30-F
100 W
– Option X530AC
–
– Option X530AD
Software Option
X597AF
X597AG
X997AE
X997AF
08/06/07