Motorola MTR2000 T5544 Instruction / Field Service Manual page 231

1
DESCRIPTION
The CLN1202 Backplane Interconnect Board provides the electrical interconnections between the Station Control
Module (SCM), the Power Supply, the Power Amplifier, and any optional plug-in modules of the station. The
board also provides the connectors necessary to interface the station to phone lines, peripheral RF equipment, and
other communications and maintenance equipment. This section provides a general description, identification of
inputs/outputs, and a pin-out listing for all connectors, including information on signal names, functions, and
levels.
General Description
Motorola Inc., 2005
All Rights Reserved
Printed in U.S.A.
INTERCONNECT BOARD
The Backplane Interconnect Board (mounted across the rear of
the station) is constructed with connectors on both sides. The
connectors on one side mate with various station plug-in
modules (such as the SCM, Wireline Interface Board and Aux-
iliary I/O option board); the connectors on the other side al-
low interface connections between the station and the phone
lines, Power Supply, PA control signals, antenna relay, and
other communications and maintenance equipment.
Government & Enterprise Mobility Solutions
1301 E. Algonquin Road, Schaumburg, IL 60196
BACKPLANE
MODEL CLN1202
68P81096E46-E
09/30/05-UP