Zetron Repeater Panel
Cable
STOP
IMPORTANT
CDN6351
(Zetron interface cable)
2
An interface cable, model CDN6351 is required to interface the Zetron
Model 38 Repeater panel to the MTR2000. This cable is not an option to the
MTR2000 station; it must be ordered as a separate item.
To connect the Zetron panel to the MTR2000 repeater:
1.
On the MTR2000 backplane, remove the screw centered under the
System (J5) connector. Remove the connector strain relief / fuse ac-
cess plate.
2.
Connect the Zetron interface cable to the System (J5) connector on
the MTR2000 Backplane. See Figure 2.
When installing the Zetron
panel, ensure that an Electro-
Static Discharge (ESD) cable
is connected (via banana
plug) to the hole in the front-
right handle of the station.
Otherwise, the MTR2000
and Zetron panel may be
damaged.
MTR2000
Repeater
Back
Front
Zetron
Panel
Back
Figure 2.
MTR2000 to Zetron Panel – Cable Connection
MTR2000
Backplane
68P81095E71-A
ESD
Connect
09/30/05