CLN1202 Station Backplane
Note
10
In Tables 3 to 7...
...the "To/From" column provides the source or destination of the signal
as a connector number followed by a pin number. The first part (e.g. J3)
represents the assigned connector number, followed by the specific con-
nector pin number(s).
'
''
...symbols
and
indicate pin assignment functions which are jumper
configurable. This applies to some General Purpose Inputs (GPIs) and
some General Purpose Outputs (GPOs).
...an asterisk (*) indicates an active low signal.
68P81096E46-E
09/30/05