Cyc1000 Iot / Maker Board; About Arrow Cyc1000 Board; Useful Links - Arrow CYC1000 User Manual

CYC1000 IoT / Maker Board

1.1 About Arrow CYC1000 Board

The CYC1000 is a customizable IoT / Maker Board ready for evaluation, development and/or use
in a product. It is built around the Intel Cyclone 10 LP FPGA, which is optimized for low-cost and
low-power, making them ideal for high-volume and cost-sensitive applications. High density sea
of programmable gates and on-board resources allow implementation of Nios II 32-bit
microcontroller IP, which provides the ideal solution for I/O expansion, chip-to-chip interfacing,
industrial, automotive and consumer applications.
The CYC1000 is equipped with an Arrow USB Programmer2, SDRAM, flash memory,
accelerometer sensor and PMOD/ADRUINO MKR connectors making it a fully featured plug and
play solution without any additional costs.
The CYC1000 board contains all the tools needed to use the board in conjunction with a computer
that runs a 64-bit Linux / Microsoft Windows 7 operating system or later.

1.2 Useful Links

A set of useful links that can be used to get relevant information about the CYC1000 or the Cyclone
10 LP FPGA.
•
CYC1000 at Arrow Shop
•
CYC1000 at Trenz Electronic Shop
•
Intel Cyclone 10 LP Webpage
•
CYC1000 Wiki Page
CYC1000 User Guide
Page | 5
www.arrow.com
January 2020