Hardware Reference Manual
5 Getting Started
Prerequisites
Before user power up the ERAGON660 board for the first time, will need following things:
Sr No.
1
ERAGON660 (only SBC or SBC with
IO card) board
2
Eragon Display board
3
Power adapter (12V@3A)
4
FFC Cable for connecting LCD display
to the ERAGON660 SBC Board
Starting the board for the first time
To start the board, follow these simple steps:
Step 1. First, connect the ERAGON660 SBC Board to the Display board through FFC cable (DSI cable)
Step 2. Connect the Type C-USB cable to connector J13 of SBC
Step 3. Ensure that the boot switches SW3 are set to '0000', all in off position.
Step 4. Connect the complaint power supply to power connector J9.
Step 5. On the switch SW2.
Now board is in the booting process.
Please note that the first boot takes several minutes due to Androids initialization. Subsequent boot
times should be faster.
Version 1.0
Details
Table 4 : Prerequisite table
MFG Part/EI Part
17_00515_01/17_00617_01
17_00453_02
PTDA402D-120300
687640152002
- 15 -
Qty :-
1
1
1
1
eInfochips Confidential