Table of Contents
Advertisement
CYC5000 IoT / Maker Board
1.1 About Arrow CYC5000 Board
The CYC5000 is a customizable IoT / Maker Board ready for evaluation, development, and/or use
in a product. The board is based on Cyclone V FPGA, which is optimized to simultaneously
accommodate the shrinking power consumption, cost, and time-to-market requirements,
furthermore, increasing bandwidth requirements for a wide spectrum of general logic and DSP
applications. The ready-to-use hard intellectual property (IP) blocks in the core FPGA fabric, such
as variable precision digital signal processing (DSP) blocks, and multiport memory controllers
consume less power and free up more logic resources, which provides sufficient resources to
implement other functions such as Nios II 32-bit microcontroller IP or various interface controls.
The CYC5000 is equipped with an Arrow USB Programmer2, SDRAM, flash memory, CRUVI HS
and ARDUINO MKR connectors making it a fully featured plug-and-play solution without any
additional costs.
The CYC5000 board contains all the tools needed to use the board in conjunction with a
computer that runs a 64-bit Linux / Microsoft Windows 10 operating system or later.
1.2 Useful Links
A set of useful links that can be used to get relevant information about the CYC5000 board or
the Cyclone V FPGA.
CYC5000 at Arrow Shop
•
CYC5000 at Trenz Electronic Shop
•
•
Intel Cyclone V Webpage
CYC5000 Wiki Page
•
CYC5000 User Guide
Page | 5
www.arrow.com
March 2023
Advertisement
Table of Contents
