Arrow CYC1000 User Manual page 22

4.2.1 Download the appropriate version of Arrow USB Programmer2 for CYC1000 from Trenz
Electronic Wiki page or alternatively this direct
4.2.2 After downloading the file, run the installer to install the Arrow USB Programmer2. The
setup executable installs the programmer DLL and adds some keys to the registry of the
PC.
4.2.3 After connecting the CYC1000 board to the PC, two unknown devices might appear in the
"Other devices" section of device manager of the PC.
Windows usually automatically finds the appropriate drivers for these devices. After some
time, the "Other devices" section should be empty. Instead, two USB Serial Converters
should be listed in the section "USB Serial Bus controllers":
CYC1000 User Guide
link.
Page | 22
www.arrow.com
January 2020