Create And Configure The Multiplexer - Arrow CYC1000 User Manual

5.2.6.9 Select simple_counter.bsf checkbox to generate a symbol for our schematic design.
5.2.6.10 Click "Finish".
The counter is now created.

5.2.7 Create and Configure the Multiplexer

The next step is to create a mux component. This mux will be used along with a push button on
the CYC1000 board to control the speed of the counter, where the counter outputs will be seen
on the LEDs.
5.2.7.1 To create this mux, select IP Catalog and expand Basic Functions → Miscellaneous and
select LPM_MUX or type mux in the search field.
5.2.7.2 Click "Add".
CYC1000 User Guide www.arrow.com
Page | 36 January 2020