Compiling The Design - Arrow CYC1000 User Manual

The Pin Planner should now look like this:
5.2.13.6 Close the Pin Planner. The settings are automatically saved.

5.2.14 Compiling the Design

5.2.14.1 You can set the default I/O Standard which can eliminate some design warning and save
you time from setting the standard for some pins manually.
Open Assignments → Device → Device and Pin Options → Voltage and set Default I/O
Standard to "3.3-V LVTTL" and press "OK" to all the windows.
CYC1000 User Guide
Page | 51
www.arrow.com
January 2020