Analysis And Synthesis; Adding Timing Constraints - Arrow CYC1000 User Manual

5.2.10.10 Save your design. Open the File Menu and select "Save". Save it as top.bdf

5.2.11 Analysis and Synthesis

The next step is to run Analysis and Synthesis to ensure that there are no errors in the design. To
run Analysis and synthesis open Processing → Start → Analysis and Synthesis or from clicking
button on the top toolbar.
There should be no errors. If there are errors, they should be fixed before continuing and Analysis
and Synthesis run again.

5.2.12 Adding Timing Constraints

Timing Constraints tell the Quartus what are the timing requirements for this design. Timing
Constraints are required in every CPLD/FPGA design.
5.2.12.1 To add the timing constraints, select File → New and under the "Other File" section,
select "Synopsys Design Constraints File" and select "OK".
CYC1000 User Guide www.arrow.com
Page | 46 January 2020