6.1.3
The programmer should add the programming file automatically. After opening the
program this should be the view of the new window:
6.1.4
Click Hardware Setup... and double click Arrow-USB-Blaster entry in the Hardware Setup
tab. The Currently selected hardware should now show Arrow-USB-Blaster [USB0]
(depending on your PC, the USB port number may variant).
6.1.5
Click "Close".
6.1.6
Make sure the hardware setup is Arrow-USB-Blaster [USB0] and the mode is JTAG. If the
Mode is not set to JTAG, click on it and select JTAG from the drop-down menu.
CYC1000 User Guide
Page | 55
www.arrow.com
January 2020