Arrow CYC1000 User Manual page 49

5.2.13.1 Open the Pin Planner: Assignments → Pin Planner.
A new window will open as seen below:
5.2.13.2 To make pin assignments, select the CLK12M (node name) on the bottom portion and
drag and drop it to pin M2 of the Top View of the FPGA or alternatively set the Location
field of the CLK12M to PIN_M2.
Note that the Location of the CLK12M is now set to Location PIN_M2 (as seen in blue
colour in the top view of the FPGA).
CYC1000 User Guide
Page | 49
www.arrow.com
January 2020