Introduction To The Cyc1000 Board; Layout And Components; Figure 1 - Cyc1000 Board (Top View) - Arrow CYC1000 User Manual

Introduction to the CYC1000 Board

2.1 Layout and Components

Figure 1 shows a top view of the board. It depicts the layout of the board and indicates the location
of the various connectors and key components.
The following are available on the CYC1000 board:
•
Intel Cyclone 10 LP 10CL025YU256C8G device
•
Arrow USB Programmer2 on-board for programming; JTAG Mode
•
64MBit SDRAM 166MHz
•
16Mbit serial configuration flash memory
•
12MHz MEMS Oscillator
•
One optional MEMS Oscillator of preferred frequency
•
8x red user LEDs
•
2x board indication LEDs
•
2x user push buttons
•
3-axis accelerometer
•
12-pin PMOD header
•
Arduino MKR header
•
User JTAG header
•
User I/O header
CYC1000 User Guide

Figure 1 - CYC1000 Board (top view)

Page | 7
www.arrow.com
January 2020