5.1.14 Click "Next".
5.1.15 Project Summary Page
This is the Summary Page that showing the settings Quartus Prime will use for this Project.
Those settings can be changed if required at a later time.
5.1.16 Click "Finish".
5.2 Building a Blinky Project with CYC1000
Overview: In this section you will create the components to a design, make connections, set the
pins and compile a project. The goal is to go through the design process of a simple blinky project,
where the toggle speed of the LEDs could be controlled by one of the pushbuttons of the CYC1000.
CYC1000 User Guide
Page | 28
www.arrow.com
January 2020