Create And Configure The Counter - Arrow CYC1000 User Manual

5.2.5.9 Click "Finish". The PLL (1
5.2.5.10 If this is the first time that you are using this version of Quartus Prime, you might see a
pop-up Window for Quartus Prime IP Files, that asks if the tool should add IP files
automatically after generating them.
5.2.5.11 Select "Automatically add Quartus Prime IP Files to all projects".
5.2.5.12 Click "Yes" to allow all of the IP to automatically be added to the project, and so that this
message will not be seen for other designs.

5.2.6 Create and Configure the Counter

The next step is to create the counter which will drive the LEDs on the CYC1000 board.
5.2.6.1 To create this counter, select the IP Catalog and expand the Basics → Arithmetic and
select the LPM_COUNTER or type "counter" in the search field.
Note: LPM stands for Library of Parameterized Modules
5.2.6.2 Click "Add".
CYC1000 User Guide
st
component) will now be created.
Page | 34
www.arrow.com
January 2020