BW 213 D-4
5.4
Running-in instructions
The following maintenance work must be per-
formed when running in new machines or
overhauled engines:
Caution
!
Up to approx. 250 operating hours check the
engine oil level twice every day.
Depending on the load the engine is subjected
to, the oil consumption will drop to the normal
level after approx. 100 to 250 operating hours.
After a running-in time of 30 minutes
Retighten the V-belt
l
After 50 operating hours
Retighten bolted connections on intake and
l
exhaust tubes, oil sump and engine mounts.
Retighten the bolted connections on the ma-
l
chine.
Retighten all wheel fastening screws with the
l
specified tightening torque.
Oil change vibration bearings
l
Oil change in drive axle
l
Oil change in wheel hubs
l
After 500 operating hours
Oil change vibration bearings
l
B O M A G
M a i n t e n a n c e
5 3