Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions page 62

E v e r y 2 5 0 o p e r a t i n g h o u r s
Cleaning with cold cleansing agent
Caution
!
Protect electrical equipment such as genera-
tor, regulator and starter against the direct wa-
ter jet.
Spray the engine with a suitable cleansing
l
agent, e.g. cold cleanser, let it soak in for a
while and spray it off with a strong water jet.
Run the engine warm for a while to avoid cor-
l
rosion.
6 2
5.14 Check the oil level in the
drive axle
Park the machine on level ground.
l
Fig. 78
Unscrew the oil level inspection plug (Fig. 78)
l
and check the oil level.
i Note
The second level inspection plug as at the back.
After filling in oil wait until the oil has evenly distrib-
uted inside the axle.
The oil level must reach the bottom edge of the
level bore.
Top up oil, if necessary.
l
For quality of oil refer to the table of fuels and
lubricants.
Turn the level inspection plug tightly back in.
l
B O M A G
BW 213 D-4