Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions page 43

4.13 Towing in case of an engine
failure
Danger
!
Secure the machine with wheel chocks against
unintentional rolling.
Danger
!
Danger of accident!
When using towing ropes tow the machine
only uphill.
When towing downhill you must use a rigid
towing device.
Secure the machine with wheel chocks
l
against unintentional rolling.
Attach the towing ropes safely to the front or
l
rear lifting eyes.
Caution
!
Towing speed 1 km/h, max. towing distance
500 m.
Open the tailgate.
l
Fig. 59
Slacken the middle hexagon on both valves
l
(Fig. 59) for approx. 2 to 3 turns.
Caution
!
Do not turn the valves out completely.
BW 213 D-4
Fig. 60
To release the brake turn counter nuts 1 (Fig.
l
60) approx. 8 mm back.
Turn the brake releasing screws (2) complete-
l
ly in against the stop.
Caution
!
From this stop turn the screw in for maximum
another turn to release the brake!
Turn the screws in evenly on both sides.
Turn the screws in alternately for ¼ turn at a
l
time.
Repeat this measure on the opposite wheel
l
side.
Fig. 61
Remove plug 1 (Fig. 61).
l
Place an U-section (5) across the brake hous-
l
ing (2) and turn the screw (4) into the tapped
bore (3), until it bottoms.
Turn the nut (6) down and tighten it approx.
l
one revolution. The drum must rotate freely.
B O M A G
O p e r a t i o n
4 3