Bomag BW 213 D-4 Operating Instructions, Maintenance Instructions page 59

5.9 Checking the hydraulic oil
level
Caution
!
In mit Panolin HLP Synth. 46, the same oil must
be used for filling up. In case of any other ester
based oil consult the lubrication service de-
partment of the respective oil manufacturer.
Fig. 73
Check the oil level in the inspection glass (Fig.
l
73) on the hydraulic oil tank.
Normal level
approx. 3 cm below the upper edge of the inspec-
tion glass.
Minimum level
middle of inspection glass.
Caution
!
If during the daily oil check the oil level is
found to have dropped, check all lines, hoses
and components for leakages.
If necessary fill in hydraulic oil through the filler
l
neck.
For quality and quantity of oil refer to the table
of fuels and lubricants.
BW 213 D-4
5.10 Check the coolant level
Danger
!
Danger of scalding!
Fill up coolant only when the engine is cold.
Fig. 74
Check the coolant level (Fig. 74).
l
Caution
!
If, during the daily inspection the coolant level
is found to have dropped, check all lines, hos-
es and engine for leaks.
To top up unscrew the filler cap and fill in cool-
l
ant up to the MAX-mark.
For quality of coolant refer to the chapter 5.2,
fuels and lubricants.
B O M A G
E v e r y 1 0 o p e r a t i n g h o u r s
5 9