4.14 Transport
Danger
!
Danger of accident!
Use only stable loading ramps of sufficient
load bearing capacity. Make sure that persons
are not endangered by the machine tipping or
sliding off.
Lash the machine down, so that it is secured
against rolling, sliding and turning over.
Do not stand or step under loads being lifted.
Always use shackles on the lifting points for
loading, tying or lifting the machine.
Fig. 64
Pull the spring pin (Fig. 64) out.
l
Engage the articulation lock and secure it with
l
the spring pin.
Fig. 65
Engage the articulation lock and secure it with
l
the spring pin (Fig. 65).
BW 213 D-4
Fig. 66
Lash the machine on the transport vehicle
l
(Fig. 66), use the four lashing eyes on front
and rear frame for this purpose.
Support the front frame to avoid overstressing
l
of the rubber buffers.
Fig. 67
For lifting use also the four lifting eyes (Fig. 67)
l
and appropriate lifting gear.
Weights: See technical data
After transport release the articulation lock
l
again and store it in the receptacle.
B O M A G
O p e r a t i o n
4 5