Fig. 139
Check adjustment and condition of scrapers
l
(Fig. 139), adjust or replace the teeth if neces-
sary.
To adjust the scrapers slacken the clamping
l
screws and push the scrapers towards the
drum, leaving a gap of about 25 mm.
Retighten the clamping screws.
l
BW 213 D-4
5.40 Adjust the parking brake
Caution
!
Have adjustment work on the brakes only car-
ried out by a specialist! Always adjust both
sides.
Secure the machine with wheel chocks
l
against rolling.
Start the diesel engine to relieve the brake.
l
Fig. 140
Disengage the travel lever (Fig. 140) to the
l
left, but do not move to position "I" or "II".
The parking brake is released
Fig. 141
Unscrew locking plate 2 (Fig. 141).
l
Turn the square (1) in anti-clockwise direction
l
against the stop.
B O M A G
A s r e q u i r e d
9 1